Resources Recycling ISSN:2765-3439(Print) 2765-3447(Online) 자원리싸이클링

Tarascon, J. M., Armand, M., 2001: Issues and challenges facing rechargeable lithium batteries (Review), Nature, 414(6861), pp.359-367.

Goodenough, J. B., Park, K.-S., 2013: The Li-Ion Rechargeable Battery: A Perspective Journal of the American Chemical Society, 135, pp.1167-1176.

Goodenough, J. B., Kim, Y., 2010: Challenges for Rechargeable Li Batteries, Chemistry of Materials, 22, pp.587-603.

Armand, M., Tarascon, J. M., 2008: Building better batteries, Nature, 451, pp. 652-665.

Hwang, I, Kim, Y.-M., Kim, Y. H., HAn, S., 2024: Review on Life Cycle Assessment of Waste Lithium-ion Battery Recycling Process, Resources Recycling, 33, pp.3-13.

Gaines, L., Sullivan, J., Burnham, A., 2011: Life-Cycle Analysis for Lithium-Ion Battery Production and Recycling, Transportation Research Board 90th Annual Meeting, p.11-3891, Transportation Research Board, Washington, D.C., 23-27 January 2011, Printed in USA.

Dewulf, J., Van der Vorst, G., Denturck, K., et al., 2010: Recycling rechargeable lithium ion batteries: Critical analysis of natural resource savings, Resource, Conservation and Recycling, 54(4), pp. 229-234.

Fisher, K., Wallén, E., Laenen, P. P., et al., 2006: Battery waste management life cycle assessment, Final report for publication, Environmental Resources Management (ERM), Ltd., London.

Hischier, R., Wäger, P., and Gauglhofer, J., 2005: Does WEEE recycling make sense from an environmental perspective?: The environmental impacts of the Swiss take-back and recycling systems for waste electrical and electronic equipment (WEEE), Environmental Impact Assessment Review, 25(5), pp. 525-539.

Baum, Z. J., Bird, R. E., Yu, X., et al., 2022: Lithium-Ion Battery Recycling─Overview of Techniques and Trends, ACS Energy Letters, 7(2) pp 712-719.

Bertuol, D. A., Machado, C. M., Silva, M. L., et al., 2016: Recovery of cobalt from spent lithium-ion batteries using super-critical carbon dioxide extraction, Waste Manage, 51, 245-251.

Dorella, G. and Mansur, M. B., 2007: A study of the separation of cobalt from spent Li-ion battery residues, J. Power Sour., 170, 210-215.

Wang, H., Huang, K., Zhang, Y., et al., 2017: Recovery of lithium, nickel, and cobalt from spent lithium-ion battery powders by selective ammonia leaching and an adsorption separation system, ACS Sustain. Chem. Eng., 5, pp.11489-11495.

Zeng, X., Li, J., Singh, N., 2014: Recycling of Spent Lithium-Ion Battery: A Critical Review, Critical Reviews in Environmental Science and Technology, 44(10), pp. 1129-1165.

Zhang, P., Yokoyama, T., Itabashi, O., et al., 1998: Hydrometallurgical process for recovery of metal values from spent lithium-ion secondary batteries, Hydrometallurgy, 47, 259-271.

Wang, Y., Lei, L., Liu, J., et al., 2022: Accelerators for normal concrete: A critical review on hydration, microstructure and properties of cement-based materials, Cement and Concrete Composites, 134, 104762.

Wang, Y., Shi, C., Ma, Y., et al., 2021: Accelerators for shotcrete - Chemical composition and their effects on hydration, microstructure and properties of cement-based materials, Construction and Building Materials, 281, 122557.

Paglia, C., Wombacher, F., Böhni, H., 2003: The influence of alkali-free and alkaline shotcrete accelerators within cement systems: Influence of the temperature on the sulfate attack mechanisms and damage, Cement and Concrete Research, 33, pp.387-395.

Zhong, H., Yang, L., Wang, F., 2024: Properties of (Al, Fe)-ettringite solid solution: Experiment, atomic simulation, and thermodynamics modeling, Cement and Concrete Research, 182, 107556.

Zhang, J., Peng, Z., Yi, L., et al., 2024: CO-H2 Gas-Based Reduction Behavior of Cr-Rich Electroplating Sludge Mixed with Iron Ore Powder, Metals, 14(3), 325.

Yuan, X., Song, J., Hu, W., et al., 2025: Characteristics of iron phase migration and redox performance of Fe/Al particles blending with iron-rich sludge ash, Chemical Engineering Journal, 309, 121501.

Fang, Y., Liu, A., Li, N., et al., 2025: Phosphorus recovery from Fe/Al-rich sewage sludge ash: Combining wet and thermochemical methods, Separation and Purification Technology, 363, 131823.

Liang, C., Le, X., Fang, W., et al., 2022: The Utilization of Recycled Sewage Sludge Ash as a Supplementary Cementitious Material in Mortar: A Review, Sustainability, 14(8), 4432.

Amri, R. E., Zahnoune, R., Boudouch, O., et al., 2025: Optimization of sludge recirculation for sustainable water treatment at Ait Massoud dam Morocco, Discover Water, 5, 54.

Brykov, A. S., Vasil’ev, A. S., Mokeev, M. V., 2012: Hydration of Portland cement in the presence of high activity aluminum hydroxides, Russian Journal of Applied Chemistry, 85, pp.1793-1799.

ASTM C403 / C403M-16, Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance, ASTM International, West Conshohocken, PA, USA, 2016.

Lee, J.-C., 2023: Evaluation of Setting Times of Concrete Using Electro-Mechanical Impedance Sensing Technique, Materials, 16(16), 5618.

Ahmad, M., Gulzar, A., Haq, Z. U., et al., 2023: Effect of sewage sludge concentrations on concrete strength (Pure and Applied Biology (PAB)), Pure and Applied Biology, 12(2), pp.808-816.

Stepanov, S. V., Morozov, N. M., Borovskikh, I. V., et al., 2016: Application of Galvanic Sludge for Acceleration of Concrete Hardening, Indian Journal of Science and Technology, 9(43), pp.1-10.

Kaish, A. B. M. A., Odimegwu, T. C., Zakaria, I., et al., 2021: Properties of concrete incorporating alum sludge in different conditions as partial replacement of fine aggregate, Construction and Building Materials, 284, 122669.

Chen, Y., Liang, D., Chen, H., et al., 2022: Review of resource utilization of Fe-rich sludges: purification, upcycling, and application in wastewater treatment, Environ. Rev., 30, pp.460-484.

Malaiškienė, J., Kižinievič, O. and Kižinievič, V., 2019: A Study on Tannery Sludge as a Raw Material for Cement Mortar, Materials, 12(9), 1562.

Keeley, J., Jarvis, P., Judd, S. J., 2012: An economic assessment of coagulant recovery from water treatment residuals, Desalination, 287(15), pp.132-137