A Basic Study for Manufacturing High Refractive Beads from the Waste Fluorescent Glass

Gee Hun Lee; Dong Hoon Lee; Young Jun Song; Kim Chang Kwon

doi:10.7844/kirr.2020.29.3.51

All Issue

2020 Vol.29, Issue 3 Preview Page Next Page

Research Paper

A Basic Study for Manufacturing High Refractive Beads from the Waste Fluorescent Glass 폐형광등 유리를 활용한 고굴절 글래스비드의 제조 연구

30 June 2020. pp. 51-60

PDF XML

Abstract

This study was carried out to get the optimum conditions for manufacturing high refractive glass beads from waste fluorescent lamp glass. Chemical composition, X-ray diffraction pattern, particle size distribution, refractive index of glass beads, and the effect of air mixing ratio and ejection rate were investigated. The obtained results are as follows. The X-ray diffraction pattern and chemical composition of glass beads made of waste fluorescent glass are similar to common glass except ReO2 0.0108 wt%, BaO 0.071 wt%, NiO 0.0039 wt% and CaO 7.8 wt% but 11.7 wt% of common glass. The glass beads made of waste fluorescent lamp glass have the narrower particle size distribution of and the higher refractive index than the glass beads made of common glass. The optimal conditions of kiln operation for manufacturing glass beads from waste fluorescent lamp glass are 20 m/sec of ejection rate, 1.7 of air mixing ratio, and 940°C of temperature.

Keywords

Air Mixing Ratio

Ejection Rate

Glass Beads

High Refractive

Waste Fluorescent Lamp

본 연구는 폐형광등을 사용하여 고굴절 유리비드를 제조하기 위한 최적 조건 도출을 위해 진행되었다. 제작된 유리비드는 XRD 분석과 더불어 물리·화학적 분석을 통해 유리비드의 굴절률 및 공기혼합비율, 방출속도에 따른 영향을 조사하였다. 연구를 통해 얻어진 결과는 다음과 같다. 형광등 재활용유리로 제작된 글라스 비드와 일반 재활용 유리로 제작된 글라스비드 시료를 XRF 분석결과 일반 재활용 유리로 제작한 글라스비드에 CaO가 11.7 wt% 함유되 있는 반면 형광등 재활용 유리로 제작한 글라스비드에는 CaO 7.8 wt% 함량 비중과 비교해 3.9 wt% 함량 비중이 더 높은 것으로 분석되었다. 또한 형광등 재활용 유리로 제작된 글라스비드에는 일반 재활용 유리로 제작한 글라스비드에 함유되지 않은 ReO2 0.0108 wt%, BaO 0.071 wt%, NiO 0.0039 wt% 가 함유되어 있는 것을 알 수 있었다. 일반 재활용 유리로 제작된 글라스 비드와 폐형광등을 재활용하여 유리로 제작된 글라스비드의 Refractive Index 비교 시 폐형광등으로 제작된 유리 비드가 일반 재활용 유리로 제작된 글라스비드보다 더 작은 입자 크기분포와 높은 굴절률을 갖는 것을 알 수 있었다. 결론적으로 폐형광등 재활용 유리를 구상 형태의 글라스비드로 제작하기 위하여 Kiln 방식의 공정에서는 공기 혼합비율 1.7, 화염온도조건 940°C 20 m/sec 조건에서 가장 높은 생성율을 확인할 수 있었다.

키워드

공기혼합비율

굴절률

배출률

유리비드

폐형광등

References

Kim, C. K., 2012 : Magement of Household Hazardous Waste, Sangmyung University, PhD thesis, pp.12-28,

Korea Environment Corporation, Korea resource reclration information system https://www.recycling-info.or.kr, May 26, 2020.

Lee, G. H., 2013 : Landfill and surrounding environment ecosystem report on the behavior of mercury substances- Focusing on lighting equipment waste, Metropolitan Landfill Site Construction Report, pp.24-34.

Erhan, B. P., Muhammet, V. A., 2016 : Temperature Reduction of Concrete Pavement Using Glass Bead Materials, International Journal of Concrete Structures and Materials, 10(1), pp.39-46.

10.1007/s40069-016-0130-2

Park, Y. K., Ko, H. J., Kim, H. W., 2015 : An Effectiveness of Recycling Fluorescent Lamp with a Slag Stimulant, Korea Concrete Institute Conference Proceedings, pp.659-660.

Yoon, S. J., Park, J. M., 2012 : A Study on the Possibility of Concrete Using Waste LCD Glass Powder, Journal Of The Architectural Institute of Korea Structure & Construction, 28(8), pp.95-102.

Lee, S. H., 2004 : Waste Fluorescent Light Management Plan in Producer Responsibility Recycling(EPR), Environmental Research Institute Kangwon National University Journal of Environmental Research, 21, pp.163-165.

Yu, I. G., Kim, J. W., Lee, S. H., 2007 : Improvement of the Road Markings Performance on National Highway, Korea Society of Transportation, pp.773-779.

Oh, H. U., 2007 : Retro reflectivity Performance Characteristics Under Environmental Road Conditions Based on Influencing Factors, Journal of the Korean Society of Civi Engineersd, 27(3D), pp.289-295.

Park, D. H., 2018 : Road visibility improvement and driving safety improvement technology development plan using external stimulus-sensitive materials, Korea Construction Life Environment Testing Institute, pp.34-40

Hahn, T. J, Choi S M., 2013 : Performance analysis modeling of axial direction direct flame rotary kiln reactors, The Korean Society of Combustion KOSCO Symposium, pp.59-60.

Kang, B. G., Kang, S. G., 2019 : Trend in glass bead and regulation of road marking, and suggestions for preparing an autonomous vehicle age, Journal of the Korean Crystal Growth and Crystal Technology, 29(5), pp.229-237.

Kim, S. S., 2001 : Studies on the structure of sodium boroate glasses by hardness and refractive index, Chonnam National University Graduate School of Education, Master's Thesis, pp.20-34.

Korea Institute of Cermic Engineering & Technology, 2016 : Certificate of Test, Certificate No. 2016-1132, p.1.

Cho, Y. J., 1990 : Development of Glass Bead Manufacturing System, Seoul Institute of Science and Technology, Korea Institute of Industrial Technology, pp.38-28.

Information

Publisher :The Korean Institute of Resources Recycling
Publisher(Ko) :한국자원리싸이클링학회
Journal Title :Journal of the Korean Institute of Resources Recycling
Journal Title(Ko) :자원리싸이클링
Volume : 29
No :3
Pages :51-60
Received Date : 2020-05-21
Revised Date : 2020-05-28
Accepted Date : 2020-06-01
DOI :https://doi.org/10.7844/kirr.2020.29.3.51

Resources Recycling ISSN:2765-3439(Print) 2765-3447(Online) 자원리싸이클링

All Issue